HP VPN Firewall Appliances System Management and Maintenance Command Reference

85
%@27091414#Aug 7 08:04:02:470 2009 Sysname IFNET/4/INTERFACE UPDOWN:
Trap 1.3.6.1.6.3.1.1.5.4: Interface 983040 is Up, ifAdminStatus is 1, ifOperStatus is
1
…
display logfile summary
Use display logfile summary to display the log file configuration.
Syntax
display logfile summary [ | { begin | exclude | include } regular-expression ]
Views
System view for security log management
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
The following matrix shows support for the display logfile summary command on different firewalls and
firewall modules:
Hardware Command com
p
atible
F1000-A-EI/F1000-S-EI No
F1000-E Yes
F5000 Yes
F5000-S/F5000-C Yes
VPN Firewall modules Yes
20-Gbps VPN firewall modules Yes
Examples
# Display the log file configuration.
<Sysname> display logfile summary
Log file is enabled.
Channel number : 9
Log file size quota : 10 MB
Log file directory : cfa0:/logfile
Writing frequency : 24 hour 0 min 10 sec