HP VPN Firewall Appliances System Management and Maintenance Configuration Guide

96
Figure 34 Viewing user logging statistics
Clearing user logs and user logging statistics
1. Select Log Report > Userlog from the navigation tree to enter the page as shown in Figure 33.
2. Click the Statistics expansion button on the page to display the information as shown in Figure 34.
3. Click Reset.
The system
clears all user logging statistics for the device and user logs in the cache.
Configuring user logging at the CLI
At the CLI, user logging is also known as "flow logging."
User logging configuration task list
Task Remarks
Configuring the user logging version Optional.
Configuring the source address for user logs Optional.
Configuring the timestamps for user logs Optional.
Exporting user logs
Exporting user logs to log servers
Required.
Perform either task.
Exporting user logs to the information center
Configuring the user logging version
Configure the user logging version according to the receiver capability. A receiver cannot resolve user
logs correctly if it does not support the version of the user logs.
To configure the user logging version:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A