HP VPN Firewall Appliances System Management and Maintenance Configuration Guide

101
Task Remarks
Configuring global parameters
for session logging
Required.
Configure the time threshold or/and traffic threshold for session logging,
and enable or disable log output for session creation and deletion.
By default, both the time threshold and traffic threshold are 0, meaning that
no session logging entries are output.
IMPORTANT:
If both the time threshold and traffic threshold are configured, a log entry is
output for the session when it reaches whichever threshold and the statistics of
the session will be cleared.
Configuring a session logging policy
1. Select Log Report > Session Log > Log Policy from the navigation tree to display existing session
logging policies, as shown in Figure 36.
Figure 36 Session logging policy list
2. Click Add to enter the session logging policy configuration page, as shown in Figure 37.
Figure 37 Creating a session logging policy
3. Configure a session logging policy as described in Table 19.
4. Click Apply.
Table 19 Configuration items
Item Descri
p
tion
Source Zone Specify the source zone and destination zone.
You can configure an optional security zone on the page entered by selecting
System > Zone.
Destination Zone