HP VPN Firewall Appliances System Management and Maintenance Configuration Guide

102
Item Descri
p
tion
ACL
Specify the ACL for filtering log entries, and only log entries permitted by the
ACL will be output.
The rules of the specified ACL can be configured on the page entered by
selecting Firewall > ACL.
Configuring global parameters for session logging
1. Select Log Report > Session Log > Global Setup from the navigation tree.
The Global Setup page appears, as shown in Figure 38.
Figure 38 Global configuration page
2. Configure the global settings for session logging as described in Table 20.
3. Click Apply.
Table 20 Configuration items
Item Descri
p
tion
Time Threshold
Specify the time threshold for outputting session logging entries.
When the lifetime of a session reaches the threshold, a log entry is output for
the session.
Traffic Threshold
Specify the traffic threshold by packet or byte for outputting session logging
entries.
When the traffic of a session reaches the threshold, a log entry is output for
the session.
Output Log Entries for Session
Creation
Select this option to output a log entry when a session is created.
Output Log Entries for Session
Deletion
Select this option to output a log entry when a session is deleted.
Log report
The log report module allows you to view the following types of log information on the device: