HP VPN Firewall Appliances System Management and Maintenance Configuration Guide

108
Figure 45 User logging 3.0 log report
Table 27 User logging 1.0 configuration items
Item Descri
p
tion
Virtual Device Virtual firewall ID.
Time/Date Time and date when the user log was generated.
Protocol Type Protocol type of the flow log.
Flow Information
Flow information:
• If the protocol type is TCP or UDP, the displayed flow information is source IP
address:source port-->destination IP address:destination port, for example,
1.1.1. 2 :10 26 - - > 1.1. 2 .10 : 6 9.
• If the protocol type is another type except TCP or UDP, the displayed flow
information is source IP address-->destination IP address, for example,
1.1.1. 2 - - > 1.1. 2.10 .
Start Time Time when the flow was created.
End Time Time when the flow was removed.
Flow Action
Operator field of the flow:
• (1)Normal over—The flow ended normally.
• (2)Aged for timeout—Timer timed out.
• (3)Aged for reset or config-change—Flow aging due to configuration change.
• (4)Aged for no enough resource—Flow aging due to insufficient resource.
• (5)Aged for no-pat of NAT—One to one NAT. In this case, only the source IP
address, the source IP address after translation and the time fields are available.
• (6)Active data flow timeout—The lifetime of the flow reached the limit.
• (8)Data flow created—Record for the flow when it was created.
• (254)Other—Other reasons.