HP VPN Firewall Appliances System Management and Maintenance Configuration Guide

109
Table 28 Flow logging 3.0 configuration items
Item Descri
p
tion
Time/Date Time and date when the flow log was generated.
Protocol Type Protocol type of the flow.
Flow Information
Flow information:
• If the protocol type is TCP or UDP, the displayed flow information is source IP
address:source port-->destination IP address:destination port, for example,
1.1.1. 2 :10 26 - - > 1.1. 2 .10 : 6 9.
• If the protocol type is another type except TCP or UDP, the displayed flow
information is source IP address-->destination IP address, for example,
1.1.1. 2 - - > 1.1. 2.10 .
Received Packets/Bytes Number of received packets/bytes.
Send Packets/Bytes Number of sent packets/bytes.
Source VPN Source VPN of the packets.
Destination VPN Destination VPN of the packets.
Start Time Time when the flow was created.
End Time Time when the flow was removed.
Flow Action
Operator field of the flow:
• (1)Normal over—Flow ended normally.
• (2)Aged for timeout—Timer timed out.
• (3)Aged for reset or config-change—Flow aging due to configuration change.
• (4)Aged for no enough resource—Flow aging due insufficient resource.
• (5)Aged for no-pat of NAT—One to one NAT. In this case, only the source IP
address, the source IP address after translation and the time fields are available.
• (6)Active data flow timeout—Lifetime of the flow reached the limit.
• (8)Data flow created—Record for the flow when it was created.
• (254)Other—Other reasons.