HP VPN Firewall Appliances System Management and Maintenance Configuration Guide

147
Figure 64 Network diagram
Configuration procedure
# Configure the RMON statistics group on the RMON agent to gather statistics for GigabitEthernet 0/1.
<Firewall> system-view
[Firewall] interface gigabitethernet 0/1
[Firewall-GigabitEthernet0/1] rmon statistics 1 owner user1
# Display statistics collected by the RMON agent for GigabitEthernet 0/1.
<Firewall> display rmon statistics gigabitethernet 0/1
EtherStatsEntry 1 owned by user1-rmon is VALID.
Interface : Gigabitethernet0/1<ifIndex.3>
etherStatsOctets : 21657 , etherStatsPkts : 307
etherStatsBroadcastPkts : 56 , etherStatsMulticastPkts : 34
etherStatsUndersizePkts : 0 , etherStatsOversizePkts : 0
etherStatsFragments : 0 , etherStatsJabbers : 0
etherStatsCRCAlignErrors : 0 , etherStatsCollisions : 0
etherStatsDropEvents (insufficient resources): 0
Packets received according to length:
64 : 235 , 65-127 : 67 , 128-255 : 4
256-511: 1 , 512-1023: 0 , 1024-1518: 0
# On the configuration terminal, get the traffic statistics through SNMP. (Details not shown.)
History group configuration example
Network requirements
Configure the RMON history group on the firewall (the RMON agent) in Figure 65 to gather periodical
traffic statistics for GigabitEthernet 0/1 every minute.
Figure 65 Network diagram