HP VPN Firewall Appliances System Management and Maintenance Configuration Guide

166
d. Look at the Status column to check whether the Remote Shell Daemon service is started. In this
example, the service is not started yet.
e. Double-click the Remote Shell Daemon service row, and then in the popped up Remote Shell
Daemon Properties window, click Start to start the service, as shown in Figure 76.
Figure 76 Remote Shell Daemon Properties window
2. Configure the firewall:
# Configure a route to the remote host. (Details not shown.)
# Set the time of the host remotely.
<Firewall>rsh 192.168.1.10 command time
Trying 192.168.1.10 ...
Press CTRL+K to abort
The current time is: 6:56:42.57
Enter the new time: 12:00
12:00