HP VPN Firewall Appliances System Management and Maintenance Configuration Guide

172
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter VTY user interface view.
user-interface vty number
[ ending-number ]
N/A
3. Set the login authentication
mode to scheme.
authentication-mode scheme
For more information about this
command, see Getting Started
Command Reference.
4. Configure the user interfaces
to support SSH login.
protocol inbound { all | ssh }
Optional.
By default, Telnet and SSH are
supported.
For more information about this
command, see Getting Started
Command Reference.
Configuring a client's host public key
This configuration task is only necessary if publickey authentication is configured for users and the clients
directly send the public key to the server for authentication.
During a publickey authentication for a client, the server first compares the SSH username and host
public key received from the client with those saved locally. If the information is consistent, it examines the
digital signature that the client sends. The digital signature is calculated by the client according to the
private key associated with the host public key.
You must configure the client's DSA or RSA host public key on the server, and specify the associated host
private key on the client to generate the digital signature, so that the client can pass publickey
authentication with correct digital signature. If the device serves as a client, the associated host private
key is specified by the specified public key algorithm.
You can manually configure the public key of an SSH client on the server, or import it from the public key
file:
• Manual configuration—Type or copy the client host public key on the client to the SSH server. The
host public key must be in the DER encoding format, which has not been converted.
Manually configured client host public keys must be in the specified format. If you use the device
to act as the client, you can use the display public-key local public command to view the host
public key and copy its contents to the server. Other ways to display a host public key might result
in incorrect format. HP recommends that you configure a client public key by importing it from a
public key file.
• Importing from the public key file—Upload the client's host public key file (in binary) to the server
(for example, through FTP or TFTP), and import the uploaded file to the server. During the import
process, the server automatically converts the public key in the public key file to a string in PKCS
format.
You can configure up to 20 SSH client public keys on an SSH server.
Configuring a client public key manually
Ste
p
Command Remarks
1. Enter system view.
system-view N/A