HP VPN Firewall Appliances System Management and Maintenance Configuration Guide

185
Figure 79 Specifying the host name (or IP address)
c. Click Open to connect to the server.
If the connection is successfully established, the system asks you to enter the username and
password. After entering the username (client001) and password (aabbcc), you can enter the
CLI of the server.
Publickey authentication enabled Stelnet server configuration
example
Network requirements
As shown in Figure 80, you can log in to the firewall through the Stelnet client (SSH2) that runs on the host.
The firewall acts as the Stelnet server, adopting publickey authentication and the RSA public key
algorithm.
Figure 80 Network diagram