HP VPN Firewall Appliances System Management and Maintenance Configuration Guide

190
Figure 85 Specifying the private key file
e. Click Open to connect to the server.
If the connection is successfully established, the system asks you to enter the username. After
entering the username (client002), you can enter the CLI of the server.
Password authentication enabled Stelnet client configuration
example
Network requirements
As shown in Figure 86, you can log in to the router through the Stelnet client running on the firewall. The
router acts as the Stelnet server and uses password authentication. The username and password of the
client are saved on the router.
Figure 86 Network diagram
Configuration procedure
1. Configure the Stelnet server:
# Generate the RSA key pairs.
<Router> system-view