HP VPN Firewall Appliances System Management and Maintenance Configuration Guide

206
Figure 95 Adding a VD
3. Configure the parameters as described in Table 33.
4. Click Apply.
Table 33 Configuration items
Item Descri
p
tion
Virtual Device ID
Enter a globally unique VD ID.
The value range depends on the device model. For more information, see Table 34.
Virtual Device
Name
Enter a VD name that is globally unique.
Max. Sessions
Set the maximum number of concurrent sessions that can be established on the VD.
Limiting the maximum number of concurrent sessions helps protect the device against
potential attacks, such as SYN flood attacks.
Max. LB Real
Service Groups
Set the maximum number of real service groups for load balancing, including IPv4 and
IPv6 real service groups for server load balancing.
For the root VD, this number also includes the number of logical link groups for link load
balancing.
Max. LB Real
Services
Set the maximum number of real services for load balancing, including IPv4 real
services and IPv6 real services for load balancing.
For the root VD, this number also includes the number of logical links for link load
balancing.
Max. LB Virtual
Services
Set the maximum number of virtual services for load balancing, including IPv4 virtual
services and IPv6 virtual services for load balancing.
For the root VD, this number also includes the number of virtual services for link load
balancing.
Table 34 Value range for the Virtual Device ID argument
Hardware Value ran
g
e
F1000-A-EI/F1000-S-EI
F1000-A-EI: 1 to 128
F1000-S-EI: 1 to 64
F1000-E 1 to 256
F5000 1 to 256