HP VPN Firewall Appliances System Management and Maintenance Configuration Guide

207
Hardware Value ran
g
e
F5000-S/F5000-C 1 to 256
VPN firewall modules 1 to 256
20-Gbps VPN firewall modules 1 to 1024
On the VD list page, you can click the Max. Sessions link, the Max. LB Real Service Groups link, the Max.
LB Real Services link, or the Max. LB Virtual Services link of a VD (except the root VD) to modify its value.
The sum of the Max. Sessions of all VDs is the maximum number of sessions supported by the physical
device. The maximum number of sessions of the root VD is the remaining number of sessions of the
physical device. This rule also applies to the Max. LB Real Service Groups, the Max. LB Real Services,
and the Max. LB Virtual Services.
When you change the value of the Max. LB Real Service Groups, the Max. LB Real Services, or the Max.
LB Virtual Services, the target value must be larger than the number of existing real service groups for
load balancing, the number of existing real services for load balancing, or the number of virtual services
for load balancing.
For more information about the load balancing feature, see "Configuring load balancing."
Assigning interfaces to VDs
1. Select Device Management > Virtual Device > Interface from the navigation tree.
A list appears, showing the interfaces and the VDs that the interfaces belong to.
Figure 96 Assigning interfaces to VDs
2. Select the target VDs for the interfaces.
3. Click Apply.
Assigning VLANs to a VD
1. Select Device Management > VD > VLAN from the navigation tree.
A list appears, showing the VDs and the VLANs.