HP VPN Firewall Appliances System Management and Maintenance Configuration Guide

210
c. Enter the VD ID 2.
d. Enter the VD name VD_A.
e. Set the maximum number of sessions to 100000.
f. Set the maximum number of real service groups for load balancing to 100.
g. Set the maximum number of real services for load balancing to 200.
h. Set the maximum number of virtual services for load balancing to 100.
i. Click Apply.
2. Create VD VD_B:
a. Click Add.
The page for adding a VD appears.
Figure 101 Creating VD_B
b. Enter the VD ID 3.
c. Enter the VD name VD_B.
d. Set the maximum number of sessions to 100000.
e. Set the maximum number of real service groups for load balancing to 0.
f. Set the maximum number of real services for load balancing to 0.
g. Set the maximum number of virtual services for load balancing to 0.
h. Click Apply.
3. Assign interfaces to the VDs:
a. Select Device Management > Virtual Device > Interface from the navigation tree.
b. Select VD_A for GigabitEthernet 1/1, and select VD_B for GigabitEthernet 1/2.
c. Click Apply.