HP VPN Firewall Appliances System Management and Maintenance Configuration Guide

239
Specifying an SSL client policy for HTTPS connection to ACS
CWMP uses HTTP or HTTPS for data transmission. If the ACS uses HTTPS for secure access, its URL
begins with https://. You must configure an SSL client policy for the CPE to authenticate the ACS for
establishing an HTTPS connection. For more information about configuring SSL client policies, see
Network Management Configuration Guide.
To specify an SSL client policy for the CPE to establish an HTTPS connection to the ACS:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter CWMP view.
cwmp N/A
3. Specify an SSL client policy.
ssl client-policy policy-name
By default, no SSL client policy is
configured.
Displaying and maintaining CWMP
Task Command Remarks
Display CWMP configuration.
display cwmp configuration [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display the current status of
CWMP.
display cwmp status [ | { begin |
exclude | include }
regular-expression ]
Available in any view.