HP VPN Firewall Appliances System Management and Maintenance Configuration Guide

To execute a batch file:

Ste

Command

1. Enter system view.

system-view

2. Execute a batch file.

execute filename

Setting the file system operation mode

The file systems support the following operation modes:

• alert—The system warns you about operations that might cause problems such as file corruption

and data loss. To prevent incorrect operations, use the alert mode.

• quiet—The system does not prompt for any operation confirmation.

To set the file system operation mode:

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. Set the file system operation

mode.

file prompt { alert | quiet }

Optional.

The default is alert.

File system management examples

# Display the files and the subdirectories in the current directory.

<Sysname> dir

Directory of cfa0:/

0 -rw- 38352332 May 14 2012 09:59:48 F5000.bin

1 drw- - May 14 2012 10:02:46 seclog

2 -rw- 233912 May 25 2012 09:49:26 system.xml

3 -rw- 891 May 14 2012 10:03:02 default_ca.cer

4 -rw- 1411 May 14 2012 10:03:02 default_local.cer

5 -rw- 3000185 May 25 2012 09:49:24 config.cwmp

6 -rw- 1023456 May 24 2012 10:02:22 aaa.dat

7 -rw- 811520 May 24 2012 10:03:38 bbb.dat

8 -rw- 217542 May 25 2012 09:50:12 startup.cfg

9 -rw- 38015932 May 17 2012 06:12:18 backup.bin

10 -rw- 349812 May 17 2012 06:48:32 v1.33.btw

11 -rw- 349812 May 17 2012 06:49:22 all

12 -rw- 294 May 18 2012 09:20:36 key.pub

13 -rw- 37975556 May 24 2012 06:40:08 main.bin

14 -rw- 108 May 25 2012 08:59:02 patchstate

15 -rw- 1024 May 24 2012 09:44:36 ccc.dat

1013792 KB total (896044 KB free)