HP VPN Firewall Appliances System Management and Maintenance Configuration Guide

37
Figure 15 Patches that are not loaded to the patch memory area
DEACTIVE state
Patches in DEACTIVE state have been loaded to the patch memory area but have not yet run in the system.
Suppose that the patch file you are loading has seven patches. After the seven patches successfully pass
the version check and CRC check, they are loaded to the patch memory area and are in DEACTIVE state.
In the patch memory area, patch states are as shown in Figure 16.
Figure 16 Patch states in the patch memory area after a patch file is loaded
ACTIVE state
Patches in ACTIVE state run temporarily in the system and become DEACTIVE at a reboot. For the seven
patches in Figure 16, if you activ
ate the first five patches, their states change from DEACTIVE to
ACTIVE. Figure 17 shows the patch states in
the system.
The patches that are in ACTIVE state change to the DEACTIVE state at a reboot.