HP VPN Firewall Appliances System Management and Maintenance Configuration Guide

42
Displaying and maintaining software upgrade
Task Command Remarks
Display information about the
system software image.
display boot-loader [ | { begin | exclude
| include } regular-expression ]
Available in any view.
Display information about the
patch package.
display patch [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display the patch information.
display patch information [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Software upgrade examples
Upgrading the system software from the CLI
Network requirement
The current system software version is soft-version1 for the firewall in Figure 19. The latest system software
image soft-version2.bin and the latest configuration file new-config.cfg are both saved in cfa0:/aaa on
the FTP server. The firewall and the FTP server can reach each other, and the PC and the firewall can
reach each other.
Upgrade the software version of the firewall to soft-version2 and configuration file to new-config.
Figure 19 Network diagram
Configuration procedure
1. Configure the FTP server (the configuration varies with server vendors):
# Set the access parameters for the FTP client (including enabling the FTP server function, setting
the FTP username to aaa and password to hello, and assign the FTP user the right to access the
cfa0:/aaa directory).
<FTP-Server> system-view
[FTP-Server] ftp server enable
[FTP-Server] local-user aaa
FTP Client
FTP Server
User
Telnet
Firewall
1.1.1.1/24
2.2.2.2/24
Internet