HP VPN Firewall Appliances System Management and Maintenance Configuration Guide

[FTP-Server-luser-aaa] password cipher hello

[FTP-Server-luser-aaa] service-type ftp

[FTP-Server-luser-aaa] authorization-attribute work-directory cfa0:/aaa

2. Configure the firewall:

# Log in to the FTP server.

<Firewall> ftp 2.2.2.2

Trying 2.2.2.2 ...

Press CTRL+K to abort

Connected to 2.2.2.2.

220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user

User(2.2.2.2:(none)):aaa

331 Give me your password, please

Password:

230 Logged in successfully

# Download new-config.cfg from the FTP server.

[ftp] ascii

[ftp] get new-config.cfg

# Download soft-version2.bin from the FTP server.

[ftp] binary

[ftp] get soft-version2.bin

[ftp] bye

# Specify new-config.cfg as the next-startup configuration file.

<Firewall> startup saved-configuration new-config.cfg

Please wait...

... Done!

# Specify soft-version2.bin as the main startup system software image.

<Firewall> boot-loader file soft-version2.bin main

# Reboot the firewall to complete the upgrade.

<Firewall> reboot

3. Use the display version command to verify that the upgrade has succeeded. (Details not shown.)

Installing patches from the CLI

Network requirements

Download a patch file from a TFTP server to fix bugs on the firewall in Figure 20. The firewall and the

TFTP server can reach each other.

Figure 20 Network diagram