HP VPN Firewall Appliances System Management and Maintenance Configuration Guide

46
Figure 21 Dealing with password loss
Examining the state of password recovery
capability
1. Reboot the device. The following information appears:
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Press Ctrl+T to start heavy memory test
Booting Normal Extend BootWare........
The Extend BootWare is self-decompressing.....Done!
****************************************************************************
* *
* HP SecPath Series BootWare, Version 1.19 *
* *
****************************************************************************
Compiled Date : Jul 5 2013
CPU Type : xxxx
CPU Clock Speed : 1400MHz
Memory Type : DDR3 SDRAM
Memory Size : 4096MB
Memory Speed : 1333MHz
BootWare Size : 768KB
Flash Size : 8MB
Password lost
Yes
No
Save the running configuration
Reboot to access EXTEND-
BOOTWARE menu
Enter 6 to skip console login
authentication
Reboot to access EXTEND-
BOOTWARE menu
Enter 8 to clear user privilege level
password
Reboot
Configure new passwords in
system view
Reboot to access EXTEND-
BOOTWARE menu
Enter 5 to restore factory defaults
Console login
password lost
User privilege level
password lost
Password recovery capability
enabled?