HP VPN Firewall Appliances System Management and Maintenance Configuration Guide

50
Note: The current operating device is cfa0
Enter < Storage Device Operation > to select device.
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTEND-ASSISTANT MENU
Ctrl+F: Format File System
Enter your choice(0-9): 5
2. At the prompt for confirmation, enter Y.
The device deletes its next-startup configuration file and restores the factory-default configuration.
Because the password recovery capability is disabled, this operation can
cause the configuration files to be deleted, and the system will start up
with factory defaults. Are you sure to continue?[Y/N]Y
Setting...Done.
3. When the EXTEND-BOOTWARE menu appears again, enter 1 to run the system software image.
The device starts up with the factory-default configuration.
4. Configure a new console login password (see "Configure a new consol
e login password.") or
new us
er privilege level passwords (see "Configure new passwords for user privilege levels.").
5. Save the running configuration to the next
-startup configuration file so the setting can take effect
after a reboot.
[Sysname] save