HP VPN Firewall Appliances System Management and Maintenance Configuration Guide

55
4. Click Apply.
Resetting the configuration
This operation disables the next-startup configuration file to serve for the next startup, restores the
device's factory defaults, and reboots the device.
To reset the configuration:
1. Select Device Management > Maintenance from the navigation tree.
2. Click the Initialize tab.
Figure 25 Resetting the configuration
3. To delete signature files, select Delete signature files.
4. To delete the signature license file, select Delete the signature license file.
5. Click Restore Factory-Default Settings.
Importing a configuration file
IMPORTANT:
Do not perform any other operations during the configuration import process.
This operation allows an administrator to import the .cfg file on the local host to the device and execute
the configuration in the file. The imported configuration takes effect immediately, but is not automatically
saved to the configuration file to be used at the next startup. To use the configuration for the next startup,
you must manually save the configuration.
To import a .cfg file:
1. Select Device Management > Maintenance from the navigation tree.
2. Click the Import tab.