HP VPN Firewall Appliances System Management and Maintenance Configuration Guide

65
Table 8 Default information channels and output destinations
Channel
number
Default
channel name
Default output destination
System information received by
default
0 console Console Log, trap and debug information
1 monitor Monitor terminal Log, trap and debug information
2 loghost Log host Log, trap and debug information
3 trapbuffer Trap buffer Trap information
4 logbuffer Log buffer Log information
5 snmpagent SNMP module Trap information
6 channel6 Web interface Log information
7 channel7 Not specified Log, trap, and debug information
8 channel8 Not specified Log, trap, and debug information
9 channel9 Log file Log, trap, and debug information
Default output rules of system information
A default output rule specifies the system information source modules, information type, and severity
levels for an output destination. Table 9 shows the default output rules.
Table 9 Default output rules
Destination
Source
modules
Lo
g
Tra
p
Debu
g
Status Severit
y
Status Severit
y
Status Severit
y
Console
All
supported
modules
Enabled Informational Enabled Debug Enabled Debug
Monitor
terminal
All
supported
modules
Enabled Informational Enabled Debug Enabled Debug
Log host
All
supported
modules
Enabled Informational Enabled Debug Disabled Debug
Trap buffer
All
supported
modules
Disabled Informational Enabled Informational Disabled Debug
Log buffer
All
supported
modules
Enabled Informational Disabled Debug Disabled Debug
SNMP
module
All
supported
modules
Disabled Debug Enabled Informational Disabled Debug
Web
interface
All
supported
modules
Enabled Debug Enabled Debug Disabled Debug