HP VPN Firewall Appliances System Management and Maintenance Configuration Guide

66
Destination
Source
modules
Lo
g
Tra
p
Debu
g
Status Severit
y
Status Severit
y
Status Severit
y
Log file
All
supported
modules
Enabled Debug Enabled Debug Disabled Debug
System information formats
The following matrix shows support for outputting system information in china-unicom-nat444 or
china-telecom format to a log host on different firewalls and firewall modules:
Hardware
Outputting system information in
china-unicom-nat444 or china-telecom format
to a lo
g
host
F1000-A-EI/F1000-S-EI No
F1000-E No
F5000 No
F5000-S/F5000-C No
VPN firewall modules Yes
20-Gbps VPN firewall modules Yes
The format of system information varies with output destinations. Table 10 shows the original format of
system information, which may be different from what you see. The actual format depends on the log
resolution tool you use.
The format of system information displayed on the Web interface depends on the Web interface.
Table 10 System information formats
Out
p
ut destination Format Exam
p
le
Console, monitor
terminal, logbuffer,
trapbuffer, SNMP
module, or log file
timestamp sysname
module/level/digest: content
%Jun 26 17:08:35:809 2008 Sysname
SHELL/4/LOGIN: VTY login from 1.1.1.1.