HP VPN Firewall Appliances VPN Configuration Guide

114
d. Click Apply.
Figure 84 Creating ACL 3101
3. Create a rule for ACL 3101 to allow packets from subnet 10.1.1.0/24 to subnet 10.1.2.0/24:
a. From the ACL list, click the icon for ACL 3101.
b. Click Add.
c. Select Permit from the Operation list. Select the Source IP Address box and enter 10.1.1.0 and
0.0.0.255 as the source subnet address and mask, respectively. Select the Destination IP
Address box and enter 10.1.2.0 and 0.0.0.255 as the destination subnet address and mask,
respectively.
d. Click Apply.
Figure 85 Configuring a rule to allow packets from subnet 10.1.1.0/24 to subnet 10.1.2.0/24
4. Configure an IKE peer named peer:
a. Select VPN > IKE > Peer from the navigation tree.
b. Click Add.