HP VPN Firewall Appliances VPN Configuration Guide

116
Figure 87 Creating an IKE proposal numbered 10
6. Create an IPsec proposal named tran1:
a. Select VPN > IPSec > Proposal from the navigation tree.
b. Click Add.
c. From the IPSec Proposal Configuration Wizard page, select Custom mode.
d. Enter the IPsec proposal name tran1, and select the packet encapsulation mode Tunnel,
security protocol ESP, authentication algorithm SHA1, and encryption algorithm DES.
e. Click Apply.
Figure 88 Creating an IPsec proposal named tran1
7. Create an IPsec policy named map1:
a. Select VPN > IPSec > Policy from the navigation tree.
b. Click Add.
c. Enter the IPsec policy name map1. Enter the sequence number 10. Select the IKE peer peer.
Select the IPsec proposal tran1 from the Available Proposal list, and click <<. Enter the ACL
number 3101.
d. Click Apply.