HP VPN Firewall Appliances VPN Configuration Guide

233
3. Create a local user:
a. Select User > Local User from the navigation tree.
b. Click Add.
c. Enter vpdnuser as the user name, select PPP as the service type, enter Hello as the password,
and enter Hello to confirm the password, as shown in Figure 164.
d. Cli
ck Apply.
Figure 164 Adding a local user
4. Enable L2TP:
a. Select VPN > L2TP > L2TP Config from the navigation tree.
b. Select the Enable L2TP box, as shown in Figure 165.
c. Cli
ck Apply.
Figure 165 Enable L2TP
5. Add an L2TP group:
a. Click Add on the page in Figure 165.
b. Enter the L2TP group name test, the peer tunnel name vpdnuser, and the local tunnel name LNS
,
and select Disable for Tunnel Authentication, CHAP as the PPP authentication method, and ISP
domain system (the default ISP domain).
c. Click the Modify button for the ISP domain, and select Local as the server type for the primary
authentication method, as shown in Figure 166.
d. Click Apply to complete the ISP domain configuration and return to the L2TP
group
configuration page.