HP VPN Firewall Appliances VPN Configuration Guide

234
Figure 166 Configuring local authentication method for VPN users
e. Enter 192.168.0.1/255.255.255.0 as the PPP server IP address/mask, and select Trust from
the PPP Server Zone list. (Select a security zone according to your network configuration.)
f. Click the Add button for User Address, select system as the ISP domain name, enter 1 as the IP
address pool number, and enter the start IP address 192.168.0.2 and the end IP address
192.168.0.100.
g. Click Apply to complete the IP address pool configuration and return to the L2TP group
configuration page.
Figure 167 Adding an IP address pool
h. Select pool1 from the User Address list and Enable from the Assign Address Forcibly list.
i. Click Apply, as shown in Figure 168.