HP VPN Firewall Appliances VPN Configuration Guide

235
Figure 168 L2TP group configurations
Verifying the configuration
1. On the user host, initiate an L2TP connection to the LNS. The host will get an IP address
(192.168.0.2) and is able to ping the private address of the LNS (192.168.0.1).
2. On the LNS, select VPN > L2TP > Tunnel Info from the navigation tree. Information about the
established L2TP tunnel appears, as shown in Figure 169.
Figure 169 L2TP tunnel information
Configuring L2TP at the CLI
L2TP configuration task list
When configuring L2TP, perform the following operations: