HP VPN Firewall Appliances VPN Configuration Guide

302

Firewall A and Firewall B use IKE for IPsec tunnel negotiation and RSA digital signature of a PKI certificate

system for identity authentication. Firewall A and Firewall B use the same CA.

Figure 213 Network diagram

Configuration procedure

1. Configure Firewall A:

# Configure the entity DN.

<FirewallA> system-view

[FirewallA] pki entity en

[FirewallA-pki-entity-en] ip 2.2.2.1

[FirewallA-pki-entity-en] common-name firewalla

[FirewallA-pki-entity-en] quit

# Configure the PKI domain. The URL of the registration server is for illustration only.

[FirewallA] pki domain 1

[FirewallA-pki-domain-1] ca identifier CA1

[FirewallA-pki-domain-1] certificate request url

http://1.1.1.100/certsrv/mscep/mscep.dll

[FirewallA-pki-domain-1] certificate request entity en

[FirewallA-pki-domain-1] ldap-server ip 1.1.1.102

# Set the registration authority to RA.

[FirewallA-pki-domain-1] certificate request from ra

# Configure the CRL distribution URL. This is not necessary if CRL checking is disabled.

[FirewallA-pki-domain-1] crl url ldap://1.1.1.102

[FirewallA-pki-domain-1] quit

# Create a local key pair using RSA.

[FirewallA] public-key local create rsa