HP VPN Firewall Appliances VPN Configuration Guide

332
Figure 231 Adding a Notes service resource
d. Configure the Notes service as described in Table 36.
e. Click Apply.
Table 36 Configuration items
Item Descri
p
tion
Resource Name
Enter a name for the Notes service resource.
The resource name must be unique in the SSL VPN system. Resources are uniquely
identified by their names.
IMPORTANT:
If you do not configure the command for Command, HP recommends including the
resource type, local address, and local port in the resource name so that users can
view the desired information after they log in to the SSL VPN system.
A resource name cannot contain question marks (?), angle brackets (< >), backward
slashes (\), quotation marks (single or double) (' "), percent signs (%), ampersand
signs (&), or pound signs (#).
Remote Host Enter the host name or IP address of the Notes mail server.
Remote Port Enter the service port number of the Notes mail server.
Local Host
Enter a loopback address or a character string that represents a loopback
address.
The local host character string must be the same as the mail server name in the
Notes application. Otherwise, the Notes service resource cannot be used
normally.
Local Port
Enter the local port number. It must be the default port number of the Notes
service.
Command
Configure the command for the resource.
Users must manually start the Notes service application. You do not need to
configure this item.
5. Configure a common TCP service resource:
The common TCP service of SSL VPN is designed to support various client/server applications. It
is widely used to access client/server TCP applications other than the ones previously mentioned.
Generally, you can configure all network ports that are possibly used by applications in common
TCP services. To access an application provided by a common TCP service, a user only needs to
configure the corresponding IP address and port number listed on the common TCP service page
as the access address and port number for the application.