HP VPN Firewall Appliances VPN Configuration Guide

333
a. Select VPN > SSL VPN > Resource Management > TCP Application from the navigation tree.
b. Click the TCP Service tab to view existing TCP services, as shown in Figure 232.
Figure 232 TCP services
c. Click Add to enter the page for adding a common TCP service.
Figure 233 Adding a TCP service resource
d. Configure the common TCP service as described in Table 37.
e. Click Apply.
Table 37 Configuration items
Item Descri
p
tion
Resource Name
Enter a name for the common TCP service resource.
The resource name must be unique in the SSL VPN system. Resources are uniquely
identified by their names.
IMPORTANT:
If you do not configure the command for Command, HP recommends including the
resource type, local address, and local port in the resource name so that users can view
the desired information after they log in to the SSL VPN system.
A resource name cannot contain question marks (?), angle brackets (< >), backward
slashes (\), quotation marks (single or double) (' "), percent signs (%), ampersand signs
(&), or pound signs (#).
Service Type Enter the type for the TCP service.
Remote Host
Enter the host name or IP address of the remote host that provides the common TCP
service.
Remote Port Enter the port number that the remote host uses for the common TCP service.