HP VPN Firewall Appliances VPN Configuration Guide

334
Item Descri
p
tion
Local Host Enter a loopback address or a character string that represents a loopback address.
Local Port Enter the port number that the local host uses for the common TCP service.
Command Configure the Windows command for the resource.
Configuring IP network resources
The SSL VPN IP network access service supports all applications that operate at the IP layer and above,
providing secure communication between users and servers. Users do not need to know the application
types and configurations. After they log in to the SSL VPN service interface, the ActiveX SSL VPN client
is automatically downloaded and started, and the users can access authorized services of certain hosts
securely.
Recommended configuration procedure:
Task Remarks
Configure global
parameters
Required.
Configure global parameters, such as the IP address pool, gateway address,
timeout time, WINS server, and DNS server, for IP network resources.
Configure host resources
Required.
Configure the host resources that users can access from the IP networks list of the
SSL VPN interface.
Configure a user-IP binding
Optional.
Configure user-IP bindings. After a user is bound with an IP address, when the
user accesses IP network resource, the system does not assign a virtual network
adapter IP address to the user from the global IP pool but assigns the bound IP
address to the user.
Configure a predefined
domain name
Optional.
With a predefined domain name configured, the gateway sends the mapping
between the predefined domain name and the IP address to clients. When
accessing this domain, a client directly uses the corresponding IP address,
eliminating the requirement for DNS resolution.
1. Configure global parameters:
a. Select VPN > SSL VPN > Resource Management > IP Network from the navigation tree.
The Global Configuration tab appears, as shown in Figure 234.