HP VPN Firewall Appliances VPN Configuration Guide

335
Figure 234 Global configuration page
b. Configure the global parameters for IP network resources, as described in Table 38.
c. Click Apply.
Table 38 Configuration items
Item Descri
p
tion
Start IP
Specify the IP address pool from which the gateway assigns IP addresses for
clients' virtual network adapters.
End IP
Subnet Mask Enter the subnet mask to be assigned to a client's virtual network adapter.
Gateway IP
Enter the default gateway IP address to be assigned to a client's virtual network
adapter.
Timeout
Set an idle timeout for client connections. If the gateway does not receive any
packet from a client during this period, the gateway disconnects the client.
WINS Server IP
Enter the WINS server IP addresses to be assigned to a client's virtual network
adapter.
DNS Server IP
Enter the DNS server IP addresses to be assigned to a client's virtual network
adapter.
Allow clients to
intercommunicate
Select this item to allow IP access between online users.
Permit only access to
VPN
Select this item to allow online users to access only the VPN.
If you do not select this item, online users can access both the VPN and the
Internet.
Show Network
Services by
Specify how to display network services for online users.
• Description: Shows the description information of the network services that
host resources allow users to access.
• IP address: Shows the destination address, subnet mask, and protocol type of
the network services that host resources allow users to access.
2. Configure host resources:
a. Select VPN > SSL VPN > Resource Management > IP Network from the navigation tree.
b. Click the Host Configuration tab to view existing host resources, as shown in Figure 235.