HP VPN Firewall Appliances VPN Configuration Guide

347
• Domain policy—Defines the common parameters and functions for the SSL VPN domain.
• Caching policy—Specifies which cached contents to clear from user hosts when users log out from
the SSL VPN system.
• Bulletin management—Allows you to provide different information to different users.
1. Configure the domain policy:
a. Select VPN > SSL VPN > Domain Management > Basic Configuration from the navigation tree.
The Domain Policy tab appears, as shown in Figure 252.
Figure 252 Domain policy
b. Configure the domain policy as described in Table 47.
c. Click Apply.
Table 47 Configuration items
Item Descri
p
tion
Enable security
check
Select this item to enable security check.
With security check enabled, the SSL VPN system checks a user host based on the
security policy and determines whether to allow the user to access resources
according to the check result.
IMPORTANT:
To implement user host security check, you must also configure the security policy.
See "Configuring a security policy."
Use verification code
Select this item to use verification codes.
After you select this item, users must enter the correct verification codes to log in
to the SSL VPN system.
Enable separate
client
Select this item to enable the separate client function.
After a user logs in to SSL VPN, the SSL VPN client automatically runs. With
separate client enabled, the system automatically closes the SSL VPN Web
interface, leaving the client software running alone.