HP VPN Firewall Appliances VPN Configuration Guide

379
Figure 292 Configuring the domain policy
2. Configure a RADIUS scheme named system:
a. Select User > RADIUS from the navigation tree.
b. Click Add.
c. Enter the scheme name system, select Extended as the supported server type, and select
Without domain name as the username format.
d. Click the Add button in the RADIUS Server Configuration area.
e. Select Primary Authentication Server as the server type, select IPv4 and enter IP address
10.153.10.131, enter port number 1812 and key expert, enter expert again to confirm the key,
and click Apply.
f. The RADIUS server is then added to the RADIUS server list.
g. Click Apply on the RADIUS page, as shown in Figure 293.