HP VPN Firewall Appliances VPN Configuration Guide

380
Figure 293 Configuring RADIUS scheme named system
3. Enable RADIUS authentication:
a. Select VPN > SSL VPN > Domain Management > Authentication Policy from the navigation
tree.
b. Click the RADIUS Authentication tab.
c. Select the box before Enable RADIUS authentication.
d. Click Apply.
Figure 294 Enabling RADIUS authentication
Verifying the configuration
Launch a browser on a host, and enter https://10.1.1.1/svpn/ in the address bar to enter the SSL VPN
login page, which uses RADIUS as the default authentication method and requires the verification code.