HP VPN Firewall Appliances VPN Configuration Guide

440
3. Configure OSPF:
a. From the navigation tree, select Network > Routing Management > OSPF.
b. In the Global area, select Enable OSPF, and then click Apply.
Figure 339 Enabling the OSPF protocol
c. In the Area Configuration area, click Add.
d. Enter the area ID 0. Select Normal as the area type. Enter the network address 192.168.1.0,
select the network mask 0.0.0.255, and then click Add Network. Enter the network address
10.0.1.0, select the network mask 0.0.0.255, and then click Add Network. Click Apply.
Figure 340 Configuring Area 0
e. Click More>> to perform OSPF interface configuration.
f. Click the icon of interface Tunnel1.
g. Select P2MP as the network type.
h. Click Apply.