HP VPN Firewall Appliances VPN Configuration Guide

451
Ste
p
Command Remarks
3. Specify the secondary VAM
server.
server secondary ip-address
ip-address [ port port-number]
Not specified by default.
Configuring the username and password
A client needs a username and a password to be authenticated by the server. You can configure the
username and password for a client by creating a local user. Only one local user can be configured for
a VAM client.
To configure a username and password for a VAM client:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter VAM client view.
vam client name client-name N/A
3. Configure a username and
password for the client.
user username password { cipher |
simple } string
Not configured by default.
Specifying the VPN domain of the VAM client
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter VAM client view.
vam client name client-name N/A
3. Specify the VPN domain of
the VAM client.
vpn vpn-name
A VAM client does not belong to
any VPN domain by default.
Configuring the pre-shared key of the VAM client
The pre-shared key is used to generate the keys for security of the channels between the server and a
client. In a VPN domain, all the VAM clients and the VAM server must be configured with the same
pre-shared key.
To specify the pre-shared key of the VAM client:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter VAM client view.
vam client name client-name N/A
3. Specify the pre-shared key of
the VAM client.
pre-shared-key { cipher | simple }
key-string
Not specified by default.