HP VPN Firewall Appliances VPN Configuration Guide

38
Figure 38 Adding a GRE over IPv4 tunnel interface (Tunnel1)
4. Configure a static route from Firewall C through interface Tunnel0 to the headquarters node, with
the routing priority being 1:
a. Select Network > Routing Management > Static Routing from the navigation tree.
b. Click Add.
c. Enter 192.168.11.0 as the destination IP address.
d. Select mask 255.255.255.0.
e. Select Tunnel0 as the outbound interface.
f. Enter priority 1.
g. Click Apply.
Figure 39 Adding a static route from Firewall C through interface Tunnel0 to the headquarters
node
5. Configure a static route from Firewall C through interface Tunnel1 to the headquarters node, with
the routing priority being 10: