HP VPN Firewall Appliances VPN Configuration Guide

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module

481

482

483

484

485

486

487

488

489

490

472

[PrimaryServer-isp-domain1] authentication dvpn radius-scheme radsun

[PrimaryServer-isp-domain1] authorization dvpn radius-scheme radsun

[PrimaryServer-isp-domain1] accounting dvpn radius-scheme radsun

[PrimaryServer-isp-domain1] quit

[PrimaryServer] domain default enable domain1

3. Configure the VAM server:

# Specify the listening address of the server.

[PrimaryServer] vam server ip-address 192.168.1.22

# Create VPN domain 1.

[PrimaryServer] vam server vpn 1

# Set the pre-shared key to 123.

[PrimaryServer-vam-server-vpn-1] pre-shared-key simple 123

# Set VAM client authentication mode to CHAP.

[PrimaryServer-vam-server-vpn-1] authentication-method chap

# Specify the IP addresses of the hubs for VPN 1.

[PrimaryServer-vam-server-vpn-1] hub private-ip 10.0.1.1

[PrimaryServer-vam-server-vpn-1] hub private-ip 10.0.1.2

# Enable VAM server for all VPNs.

[PrimaryServer] vam server enable all

Configuring the secondary VAM server

Except for the listening IP address configuration, the configurations for the secondary VAM server are the

same as those for the primary VAM server. (Details not shown.)

Configuring Hub 1

1. Configure IP addresses for the interfaces. (Details not shown.)

2. Configure the VAM client:

<Hub1> system-view

# Create a VAM client named dvpn1hub1 for VPN 1.

[Hub1] vam client name dvpn1hub1

[Hub1-vam-client-name-dvpn1hub1] vpn 1

# Specify the IP addresses of the VAM servers and set the pre-shared key.

[Hub1-vam-client-name-dvpn1hub1] server primary ip-address 192.168.1.22

[Hub1-vam-client-name-dvpn1hub1] server secondary ip-address 192.168.1.33

[Hub1-vam-client-name-dvpn1hub1] pre-shared-key simple 123

# Create a local user named dvpn1hub1, setting the password as dvpn1hub1.

[Hub1-vam-client-name-dvpn1hub1] user dvpn1hub1 password simple dvpn1hub1

[Hub1-vam-client-name-dvpn1hub1] client enable

[Hub1-vam-client-name-dvpn1hub1] quit

3. Configure the IPsec profile:

# Configure the IPsec transform set.

[Hub1] ipsec transform-set vam

[Hub1-ipsec-transform-set-vam] encapsulation-mode tunnel

[Hub1-ipsec-transform-set-vam] transform esp

[Hub1-ipsec-transform-set-vam] esp encryption-algorithm des

[Hub1-ipsec-transform-set-vam] esp authentication-algorithm sha1