HP VPN Firewall Module Series - HP SECBLADEIII-CMW520-R3819 Release Notes

The specified file will be used as the main boot file at the next reboot on slot

d. Use the display boot-loader command in user view to verify that the file has been specified

as the main startup system software image file.

<Sysname> display boot-loader

The boot file used this time:cfa0:/main.bin attribute: main

The boot file used next time:cfa0:/fw_card.bin attribute: main

Failed to get the backup boot file used next time!

Failed to get the secure boot file used next time!

e. Use the reboot command in user view to reboot the firewall module.

<Sysname> reboot

Start to check configuration with next startup configuration file, please wait.

........DONE!

This command will reboot the device. Continue? [Y/N]:y

System is starting...

f. After the reboot is complete, use the display version command to verify that the system

software image is correct.

<Sysname> display version

HP Comware Platform Software

Comware Software, Version 5.20.108, Release 3819

HP SecBlade FW Enhanced uptime is 0 week, 0 day, 20 hours, 48 minutes

CPU type: NetLogic XLP 432 1500MHZ CPU

4094M bytes DDR3 SDRAM Memory

8M bytes Flash Memory

247M bytes CF0 Card

Board PCB Version:Ver.A

CF SubCard PCB Version:Ver.A

CPLD_A Version: 1.0

CPLD_B Version: 3.0

CPLD_C Version: 1.0

Basic BootWare Version: 1.20

Extend BootWare Version: 1.20

[FIXED PORT] CON(Hardware)Ver.A, (Driver)1.0, (Cpld)3.0

[FIXED PORT] GE0/1(Hardware)Ver.A, (Driver)1.0, (Cpld)3.0

[FIXED PORT] GE0/2(Hardware)Ver.A, (Driver)1.0, (Cpld)3.0

[FIXED PORT] XGE0/1(Hardware)Ver.A, (Driver)1.0, (Cpld)3.0

[FIXED PORT] XGE0/2(Hardware)Ver.A, (Driver)1.0, (Cpld)3.0