HP VPN Firewall Module Series - HP SECBLADEIII-CMW520-R3819 Release Notes

21
Table 8 Configuration items
Item
Description
File
Click
Browse
to set the path to the .bin system software
image file.
File Type
Set the file attribute:
 Main—The image is the primary image. The system
always attempts to load the main image at startup in
preference to the backup image.
 Backup—The image is the backup image. It is used only if
the primary image is corrupted or not available.
If a file with the same name already
exists, overwrite it without any
prompt
If you do not select this option, you must make sure the
upgrade file uses a file name that is different from any
software file on the firewall module.
Reboot after the upgrade is finished
If you select this option, the firewall module automatically
reboots to complete the software upgrade.
7. Click Apply.
Upgrading system software from BootWare menus
You can use the following methods to upgrade software from BootWare menus:
 Using TFTP/FTP to upgrade software through an Ethernet port
 Using Xmodem to upgrade software through the console port
Upgrading through an Ethernet port is faster than through the console port.
Accessing the EXTEND-BOOTWARE menu
1. Power on the firewall module.
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Press Ctrl+T to start heavy memory test
Booting Normal Extend BootWare........
The Extend BootWare is self-decompressing.....Done!
****************************************************************************
* *
* HP SecBlade Series BootWare, Version 1.19 *
* *
****************************************************************************
Compiled Date : Jul 5 2013
CPU Type : XXX
CPU Clock Speed : 1500MHz
Memory Type : DDR3 SDRAM
Memory Size : 4096MB
Memory Speed : 1333MHz
BootWare Size : 768KB
Flash Size : 8MB
cfa0 Size : 247MB