HP VPN Firewall Module Series - HP SECBLADEIII-CMW520-R3819 Release Notes

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module

Table 10 Ethernet submenu options

Item

Description

<1> Download Application Program To SDRAM

And Run

Download a system software image to the

SDRAM through the Ethernet port and run the

image.

This option is available only if password recovery

capability is enabled.

<2> Update Main Application File

Upgrade the main system software image.

<3> Update Backup Application File

Upgrade the backup system software image.

<4> Update Secure Application File

Upgrade the secure system software image.

<5> Modify Ethernet Parameter

Configure FTP or TFTP file transfer settings.

<0> Exit To Main Menu

Return to the EXTEND-BOOTWARE menu.

2. Enter 5 in the Ethernet submenu to configure the network settings.

==========================<ETHERNET PARAMETER SET>==========================

|Note: '.' = Clear field. |

| '-' = Go to previous field. |

| Ctrl+D = Quit. |

============================================================================

Protocol (FTP or TFTP) :tftp

Load File Name :main.bin

Target File Name :main.bin

Server IP Address :192.168.0.2

Local IP Address :192.168.0.1

Gateway IP Address :0.0.0.0

Table 11 Network parameter fields and shortcut keys

Field

Description

'.' = Clear field

Press a dot (.), and then press

Enter

to clear the setting for a

field.

'-' = Go to previous field

Press a hyphen (-), and then press

Enter

to return to the

previous field.

Ctrl+D = Quit

Press

Ctrl

to exit the ETHERNET PARAMETER SET menu.

Protocol (FTP or TFTP)

Set the file transfer protocol to FTP or TFTP.

Load File Name

Set the name of the file to be downloaded.

Target File Name

Set a file name for saving the file on the firewall module. By

default, the target file name is the same as the source file name.

Server IP Address

Set the IP address of the FTP or TFTP server. If a mask must be

set, use a colon (:) to separate the mask length from the IP

address. For example, 192.168.80.10:24.

Local IP Address

Set the IP address of the Ethernet interface that connects to the

TFTP or FTP server.