HP VPN Firewall Module Series - HP SECBLADEIII-CMW520-R3819 Release Notes

30
Figure 8 File transfer progress
13. When the Serial submenu appears after the file transfer is complete, enter 0 at the prompt to
return to the EXTEND-BOOTWARE menu.
Download successfully!
19790016 bytes downloaded!
Input the File Name:main.bin
Updating File cfa0:/main.bin..............................................
.....................................................Done!
===========================<Enter Serial SubMenu>===========================
|Note:the operating device is cfa0 |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Update Backup Application File |
|<4> Update Secure Application File |
|<5> Modify Serial Interface Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-5):
14. Enter 1 in the EXTEND-BOOTWARE menu to boot the system.
15. If you are using a download rate other than 9600 bps, change the baud rate of the terminal to
9600 bps. If the baud rate has been set to 9600 bps, skip this step.
Upgrading the BootWare
You can upgrade the BootWare from the CLI or BootWare menus.