HP VPN Firewall Module Series - HP SECBLADEIII-CMW520-R3819 Release Notes

32
Item
Description
<3> Update BootWare By Serial
Upgrade the BootWare through the serial
port.
<4> Update BootWare By Ethernet
Upgrade the BootWare through the Ethernet
port.
<0> Exit To Main Menu
Return to the BootWare menu.
2. Enter 4 to enter the Ethernet submenu.
===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================
|<1> Update Full BootWare |
|<2> Update Extend BootWare |
|<3> Update Basic BootWare |
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4):
Table 14 Ethernet submenu options
Item
Description
<1> Update Full BootWare
Upgrade the entire BootWare.
<2> Update Extend BootWare
Upgrade the extended section of the BootWare.
<3> Update Basic BootWare
Upgrade the basic section of the BootWare.
<4> Modify Ethernet
Parameter
Modify Ethernet settings.
<0> Exit To Main Menu
Return to the BootWare menu.
3. Enter 4 to configure the network settings.
==========================<ETHERNET PARAMETER SET>==========================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP) :TFTP
Load File Name :main.btw
:
Target File Name :main.btw
:
Server IP Address :192.168.0.2
Local IP Address :192.168.0.1
Gateway IP Address :0.0.0.0
For more information about the fields, see Table 11 .
4. To upgrade the entire BootWare, enter 1 on the Ethernet submenu.
===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================
|<1> Update Full BootWare |
|<2> Update Extend BootWare |
|<3> Update Basic BootWare |