HP VPN Firewall Module Series - HP SECBLADEIII-CMW520-R3819 Release Notes

3
Hardware feature updates
None.
Software feature and command updates
None.
MIB updates
Table 4 MIB updates
Item
MIB file
Module
Description
SECBLADEIII-CMW520-R3819
New
/
/
/
Modified
/
/
/
Operation changes
None.
Restrictions and cautions
1. USB is not supported.
2. The Web interface can display a maximum of 5000 sessions.
Open problems and workarounds
HSD112168
 Symptom: Configurations such as IPSec and NAT on a subinterface of the active SecBlade card
cannot be synchronized to the standby SecBlade card after the two cards enter
synchronization state.
 Condition: This symptom occurs if the Layer-3 subinterface or Layer-3 aggregate subinterface
are created before the two cards enter synchronization state.
 Workaround: Configure the two cards to enter synchronization state, and then create the
Layer-3 subinterface or Layer-3 aggregate subinterface.
HSD110063
 Symptom: When configuration synchronization is enabled between the active and standby
SecBlade cards, new physical interface type configuration on the active card cannot be
synchronized to the standby card.
 Condition: This symptom can be seen when configuration synchronization is enabled between
the active and standby SecBlade cards.