HP VPN Firewall Module Series - HP SECBLADEIII-CMW520-R3819 Release Notes

5
Resolved problems in R3817
201304220334
 Symptom: Memory leaks occur after the SecBlade card has received large numbers of
fragment packets in an asymmetric stateful failover scenario.
 Condition: This symptom occurs after the SecBlade card has received large numbers of
fragment packets in an asymmetric stateful failover scenario.
201307170414
 Symptom: The nat traversal field in IKE SA entries displays "No" when IPsec NAT traversal has
been enabled.
 Condition: This symptom can be seen after IPsec tunnels have been established in an IPsec
NAT traversal scenario.
201304020407
 Symptom: A SecBlade card might reboot when you execute a display command.
 Condition: This symptom might occur when the following conditions exist:
 The configuration file of the SecBlade card exceeds 100 KB.
 The display command includes a regular expression, for example, the display
current-configuration | include .*.*.*/." command.
201306190471
 Symptom: After traffic matches NAT444 rules on an interface, the SecBlade card does not
create NAT444 entries for the traffic.
 Condition: This symptom might occur if the interface has two NAT444 rules that each
reference an ACL. The two ACLs specify a common source IP address but different destination
IP addresses.
HSD113119
 Symptom: If you export the configuration file through configuration backup and then import
the configuration file through configuration import, the firewall prompts that some
configurations are failed to be imported.
 Condition: This symptom occurs if you export the configuration file through configuration
backup and then import the configuration file through configuration import.
HSD113967
 Symptom: Memory leaks occur when DNS flooding attack protection is discarding packets,
resulting in forwarding failure.
 Condition: This symptom can be seen when the following conditions exist:
 DNS flooding attack protection is discarding packets.
 The firewall receives a non-SYN TCP packet that does not carry ACK.
HSD113532
 Symptom: A firewall unexpectedly reboots upon receiving abnormal ICMP messages from
EasyHacker.
 Condition: This symptom occurs when a firewall receives abnormal ICMP messages from
EasyHacker.