HP VPN Firewall Module Series - HP SECBLADEIII-CMW520-R3819P01 Release Notes

35
============================================================================
===============================<File CONTROL>===============================
|Note:the operating device is cfa0 |
|<1> Display All File(s) |
|<2> Set Application File type |
|<3> Delete File |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-3):
Changing the attribute of a system software image
System software image file attributes include main (M), backup (B), and secure (S). You
can store only one main image, one backup image, and one secure image on the firewall
module. A system software image can have any combination of the M, B, and S attributes.
If the file attribute you are assigning has been assigned to an image, the assignment
removes the attribute from that image, and the image is marked as N/A if it has only that
attribute. The file of the N/A type cannot be used at device startup.
For example, the file main.bin has the M attribute, and the file update.bin has the S
attribute. After you assign the M attribute to update.bin, the attribute of update.bin
changes to M+S and the attribute of main.bin changes to N/A.
NOTE:
You cannot remove or assign the S attribute in the File Control submenu.
To change the attribute of a system software image:
1. Enter 2 in the File Control submenu.
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
============================================================================
|NO. Size(B) Time Type Name |
|1 19790016 Feb/02/2012 11:01:50 M cfa0:/main.bin |
|0 Exit |
============================================================================
Enter file No:
2. Enter the number of the file you are working with, and press Enter.
Modify the file attribute:
============================================================================
|<1> +Main |
|<2> -Main |
|<3> +Backup |
|<4> -Backup |
|<0> Exit |
============================================================================
Enter your choice(0-4):
3. Enter a number in the range of 1 to 4 to add or delete a file attribute for the file.
Set the file attribute success!