HP VPN Firewall Module Series - HP SECBLADEIII-CMW520-R3819P05 Release Notes

22
cfa0 Size : 247MB
CPLD_A Version : 1.0
CPLD_B Version : 3.0
CPLD_C Version : 1.0
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
2. Press Ctrl+B at the prompt.
The following message appears:
BootWare password: Not required. Please press Enter to continue.
3. Press Enter to access the EXTEND-BOOTWARE menu.
Password recovery capability is enabled.
Note: The current operating device is cfa0
Enter < Storage Device Operation > to select device.
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTEND-ASSISTANT MENU
Ctrl+C: Display Copyright
Ctrl+F: Format File System
Enter your choice(0-9):
Table 9 EXTEND-BOOTWARE menu options
Item
Description
<1> Boot System
Boot the system software image.
<2> Enter Serial SubMenu
Access the Serial submenu (see Table 12 ) for upgrading
system software through the console port or changing the
serial port settings.
<3> Enter Ethernet SubMenu
Access the Ethernet submenu (see Table 10 ) for
upgrading system software through an Ethernet port or
changing Ethernet settings.
<4> File Control
Access the File Control submenu (see Table 16 ) to
manage files stored on the firewall module.